HP (Hewlett-Packard) 2200 All in One Printer User Manual


 
regulatory notices
73
hp psc 2200 series
Network compatibility depends on customer selected settings, which must be reset to
use the equipment on a telephone network in a country other than where the product
was purchased. Contact the vendor or Hewlett-Packard Company if addition product
support is necessary.
This equipment has been certified by the manufacturer in accordance with Directive
1999/5/EC (annex II) for Pan-European single-terminal connection to the public
switched telephone network (PSTN). However, due to differences between the
individual PSTNs provided in different countries, the approval does not, of itself, give
an unconditional assurance of successful operation on every PSTN network
termination point.
In the event of problems, you should contact your equipment supplier in the first
instance.
notice to users of
the Irish
telephone
network
This equipment is designed for DTMF tone dialing and loop disconnect dialing. In
the unlikely event of problems with loop disconnect dialing, it is recommended to use
this equipment only with the DTMF tone dial setting.
notice to users of
the German
telephone
network
The HP 2200 Series products are designed to connect only to the analogue public-
switched telephone network (PSTN). Please connect the TAE N telephone connector
plug, provided with the hp psc 2200 series, into the wall socket (TAE 6) code N. The
hp psc 2200 series products can be used as a single device and/or in combination
(in serial connection) with other approved terminal equipment.
geräuschemission
LpA < 70 dB
am Arbeitsplatz
im Normalbetrieb
nach DIN 45635 T. 19
VCCI-2 (Japan)
notice to Korean
customers