Filter
Top Products
x
B–15. Replacing Drive Screws B-26. . . . . . . . . . . . . . . . . . . . . . . . . .
B–16. Replacing the Storage Drawer Assembly B-27. . . . . . . . . . . .
B–17. Fast, Wide Hard Drive Jumper Settings B-30. . . . . . . . . . . . . .
B–18. Replacing Hard Drive Mounting Bracket
and Drive Orientation B-31. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B–19. Removing Storage Drawer from System Unit B-33. . . . . . . . .
B–20. Placing Hard Drives in Storage Drawer B-34. . . . . . . . . . . . . .
B–21. Removing the CPU Assembly B-39. . . . . . . . . . . . . . . . . . . . .
B–22. Memory Retention Bracket and
Memory DIMM Location B-40. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B–23. CPU Assembly Orientation B-41. . . . . . . . . . . . . . . . . . . . . . .
B–24. Memory DIMM Sequence B-42. . . . . . . . . . . . . . . . . . . . . . . .
B–25. Installing Memory Cards B-43. . . . . . . . . . . . . . . . . . . . . . . . .
B–26. Replacing the CPU Assembly B-44. . . . . . . . . . . . . . . . . . . . .
B–27. Removing the CPU Assembly B-46. . . . . . . . . . . . . . . . . . . . .
B–28. CPU Shroud Location J282/2240 B-47. . . . . . . . . . . . . . . . . . .
B–29. J282/2240 Processor Modules B-48. . . . . . . . . . . . . . . . . . . . .
B–30. Replacing the CPU Assembly B-49. . . . . . . . . . . . . . . . . . . . .
B–31. EISA/PCI/GSC Slots from Outside the
EISA/PCI Assembly B-52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B–32. EISA/GSC Slots from Inside the J282 EISA Assembly B-52.
B–33. GSC/PCI/EISA Slots from inside
the J2240 PCI Assembly B-52. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B–34. Removing the PCI/EISA Assembly B-54. . . . . . . . . . . . . . . . .
B–35. PCI/EISA I/O Assembly B–55. . . . . . . . . . . . . . . . . . . . . . . . .
B–36 Rotating the PCI/EISA Assembly
for Installation B-56. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B–37. Removing the PCI/EISA Assembly Cover B-57. . . . . . . . . . .
B–38. Removing the PCI/EISA Slot Cover B-58. . . . . . . . . . . . . . . .
B–39. Installing a PCI, EISA or Graphics Board in the EISA
Assembly B-59. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
B–40. Remove Block from PCI Assembly Cover B-60. . . . . . . . . . .
B–41. Replacing PCI/EISA Assembly Cover B-61. . . . . . . . . . . . . . .
B–42. Rotating the PCI/EISA Assembly Back B-62. . . . . . . . . . . . . .
B–43. Replacing PCI/EISA Assembly B-63. . . . . . . . . . . . . . . . . . . .
C–1. Rear Panel SCSI Connectors with Terminators Attached C-27
C–2. Rear Panel SCSI Connectors without Terminators C-28. . . . .