HP (Hewlett-Packard) 2300ux Computer Drive User Manual


 
Navigation
38 HP StorageWorks 1000ux/1900ux/2300ux Optical Jukebox User’s Guide
Table 5: Configuration options
Configuration Name Description Default
RECOVERY ON/OFF Toggles between ON and OFF. If the configuration is set
to ON, the jukebox attempts to recover from errors; if the
configuration is set to OFF, the jukebox immediately
stops moving if an error condition occurs. The default
configuration is RECOVERY ON, and recovery should
remain ON under normal conditions.
RECOVERY ON
RESTORE DEFAULTS Sets all jukebox configurations to default settings. NA
CLEAR ODOMETERS Sets all jukebox odometers to zero.
Note: Used by service personnel only.
NA
DUAL PICKER
ON/OFF
Toggles between ON and OFF. (The default setting is
DUAL PICKER ON, and dual picker mode should
remain ON under normal conditions.) If the
configuration is set to ON, the jukebox runs with dual
picker (disk transport) addressing ON; if the
configuration is set to OFF, the jukebox runs with dual
picker (disk transport) addressing OFF.
DUAL PICKER
ON
STARWARS ON/OFF Should be set to ON during normal operation. Toggles
between ON and OFF. The ON configuration enables
the vertical sensors; the OFF configuration disables the
vertical sensors.
Note: Used by service personnel only.
STARWARS ON
NEW PASSWORD Allows you to change the numerical password required
to access the menu choices under the ADMIN* menu on
the jukebox control panel.
000-000-000
SCSI LOG ON/OFF Should be set to OFF during normal operation. Toggles
between ON and OFF. Tracks internal SCSI states and
saves the information to a log.
Note: Used by service personnel only.
SCSI LOG
OFF
SECURE MS ON/OFF Toggles between ON and OFF. The ON configuration
disables
loading and ejecting disks. The OFF
configuration
enables
loading and ejecting disks.
SECURE MS
OFF