Filter
Top Products
Battery Packs
Hardware Guide 3–23
■ Stop or remove a PC Card or SD Memory Card that you are
not using.
■ Use the Fn+F9 and Fn+F10 hotkeys to quickly lower and raise
screen brightness as you need it.
■ Use optional powered speakers instead of the internal
speakers, or use the volume buttons to quickly raise and
lower system volume as needed.
■ Turn off a device connected to the S-Video connector by
using the
Fn+F4 hotkey or by turning off support for the device
in Windows.
■ Run the notebook on external power while formatting a
diskette.
■ If the notebook will be idle for several minutes, initiate
Standby or Hibernation or shut down the notebook.
Selecting Power Conservation Settings
To set the notebook to conserve power:
■ Select a short wait for the screen saver and select a screen
saver with minimal graphics and motion. To access screen
saver settings:
❏ In Windows XP, select Start > Control Panel >
Appearance and Themes > Display icon > Screen
Saver tab.
❏ In Windows 2000, select Start > Settings > Control
Panel > Display > Screen Saver tab.
■ Select a Power Scheme with low-power-use settings through
the operating system. Refer to the “Power” chapter in the
Software Guide on the Documentation Library CD.
■ Select Battery Optimized or Maximum Battery Mode in
Intel® SpeedStep (Windows 2000 only). Refer to the
“Power” chapter in the Software Guide on the Documentation
Library CD.
309971-002.book Page 23 Wednesday, November 19, 2003 2:01 PM