Filter
Top Products
Monitoring and Analyzing Switch Operation
Traffic Mirroring
Deprecation of
ACL-based
Traffic
Selection
< 1 - 4 >: Configures the selected VLAN traffic to be
mirrored in the specified session number.
[ name < name-str >]: Optional; configures the selected
port traffic to be mirrored in the specified session
name. The string can be used interchangeably with the
session number when using this command to assign
a mirroring source to a session. To configure an
alphanumeric name for a mirroring session, refer to
the command description under “Configuring a
Source Switch in a Remote Mirroring Session” on page
B-53.
Selecting Inbound Traffic Using an ACL (Deprecated)
In release K.14.01 or greater, the use of ACLs to select inbound traffic in a
mirroring session has been replaced with classifier-based mirroring policies
(see “Selecting Inbound Traffic Using Advanced Classifier-Based Mirroring”
on page B-66).
The following commands have been deprecated:
■ interface <port/trunk/mesh > monitor ip access-group <acl-name> in
mirror < 1 - 4 | name-str >
■ vlan < vid-# > monitor ip access-group <acl-name> in
mirror < 1 - 4 | name-str >
After you install and boot release K.14.01 or greater, ACL-based local and
remote mirroring sessions configured on a port or VLAN interface are auto-
matically converted to classifier-based mirroring policies. For more informa-
tion, see “Migration to Release K.14.01 or Greater” on page B-37.
B-62