Filter
Top Products
Troubleshooting
Debug/Syslog Operation
Syntax: [no] debug < debug-type > (Continued)
event
Event Log messages are automatically enabled to be sent to
debug destinations in these conditions:
• If no Syslog server address is configured and you enter
the logging <syslog-ip-addr> command to configure a
destination address.
• If at least one Syslog server address is configured in the
startup configuration and the switch is rebooted or reset.
Event log messages are the default type of debug message
sent to configured debug destinations.
ip
Enables all IP-OSPF messages for configured destinations.
ip [ ospf < adj | event | flood | lsa-generation | packet [ packet-type ] |
retransmission | spf > ]
For the configured debug destination(s):
ospf < adj | event | flood | lsa-generation | packet [ packet-type ] |
retransmission | spf > — Enables the specified IP-OSPF
message type.
adj — Adjacency changes.
event — OSPF events.
flood — Information on flood messages.
lsa-generation — New LSAs added to database.
packet [ packet-type ] — All OSPF packet messages sent and
received on the switch, where packet-type enables only the
specified OSPF packet type. Valid values are:
dd — Database descriptions
hello — Hello messages
lsa — Link-state advertisements
lsr — Link-state requests
lsu — Link-state updates
retransmission — Retransmission timer messages.
spf — Path recalculation messages.
ip [ rip < database | event | trigger > ]
rip < database | event | trigger > > — Enables the specified RIP
message type for the configured destination(s).
database— Display database changes.
event— Display RIP events.
trigger— Display trigger messages.
C-51