Filter
Top Products
4–6 Maintenance and Service Guide
Removal and replacement procedures
3. Insert the drive adapter 1 into the hard drive bay until the adapter is fully seated.
4. Replace the hard drive security screw 2.
5. Reconnect the docking station to AC power.
6. Insert the drive 1 into the adapter until the drive is fully seated.
✎
If the hard drive light 2 does not turn on, reseat the hard drive.
For more information on the PMD, refer to the instructions that were included with the kit.
7. To remove the drive, press the eject button 3 on the front of the adapter.