Filter
Top Products
Chapter 2 Setting Up Your Printer Quick Start Guide
8
z Never block the ventilation openings of the printer, otherwise the internal tem-
perature will build up and cause a fire hazard.
z Do not place the printer near alcohol, benzine, or other volatile and flammable
materials, or a fire hazard may result.
Space
Requirements
A certain amount of space is required for proper operation of the printer and also
for performing printer maintenance and replacing consumables. Use the
following figures to plan for appropriate clearances when determining a location
for your printer.
Be sure to leave ample space between the ventilation openings on the printer and the nearest wall
or other surface, otherwise overheating may occur leading to a fire hazard. For easy operation,
maintenance and replacing of consumables, you should also leave the clearances shown below
around the printer. Installation of the printer should be carried out by qualified service personnel.
255 mm
300 mm
200 mm
402 mm
9035
Quick
Start
Guide
-
en
.
book
Seite
8
Donnerstag
,
9
.
November
2006
3:12
15