Filter
Top Products
Quick Start Guide Chapter 2 Setting Up Your Printer
21
ENGLISH
Use the following procedure to enter the interface menu and add the IP Address
and other related settings.
1
Press the MENU button on the control panel.
2
Press the NEXT button until the text
“Interface Menu” is shown on the second
line of the display.
3
Press the SELECT button to enter the interface menu.
4
Press NEXT until the text “Network 1
Setup” is shown on the display.
5
Press SELECT.
6
Press NEXT until “IP ADDRESS” is
shown on the display.
7
Press SELECT.
8
Use NEXT/PREVIOUS buttons to change the digit.
9
Press SELECT for the next digit.
10
Press SELECT after all digits are set.
11
The control Panel shows again “IP
Address”.
12
Press NEXT and “Subnet Mask” is shown
on the display.
13
Repeat steps 7 – 10.
Menu
Interface Menu
Interface Menu
Network 1 Setup
Network 1 Setup
IP Address
Network 1 Setup
IP Address
Network 1 Setup
Subnet Mask
9035
Quick
Start
Guide
-
en
.
book
Seite
21
Donnerstag
,
9
.
November
2006
3:12
15