Filter
Top Products
Removing or installing the RJ45 cover
To remove the RJ-45 cover:
1. Slide the RJ-45 cover to the right (grasping the cover at the indentation on the left side) (1) in order
to release the cover.
2. Gently press the hinged bottom of the rubber tail and pull the RJ-45 cover off of the computer
(2).
To install the RJ-45 cover:
1. Gently press the end of the rubber tail and insert the RJ-45 cover into the computer (1).
2. Push on the edge of the RJ-45 cover until it snaps into place (2).
38 Chapter 6 Maintenance