Filter
Top Products
23
2 system features
network interface
network interface
All HP e-pcs feature an integrated 10/100 3Com network interface equivalent
to the 3C905C-TX network interface card.
This network solution is a 32-bit PCI Ethernet Controller with advanced
manageability capabilities. It features full-duplex, automatic 10/100 BT port
selection, Remote Wake-Up (RWU), and, depending on OS support, Remote
Power-On (RPO).
NOTE A 3COM LAN Boot ROM is integrated in the BIOS ROM chip on the system
board.
specifications
network interface advanced features
The 3Com chip supports First Plug Remote Power On. This means that once
the HP e-pc is set up and connected, if a Magic Packet is sent from a server,
the HP e-pc powers on.
TCP/IP Ping Wake-up is supported under Windows 98 and Windows 2000 in
ACPI mode.
Network Interface
Ethernet IEEE 802.3 industry standard 10 Mbps baseband CSMA/CD
(10BASE-T) and 100 Mbps baseband CSMA/CD (100Tx, FX) standards, 10
Mbps baseband CSMA/CD (10BASE2 and 10BASE5).
I/O Base Address: The NIC address can be selected
using diagnostic software provided with the driver
Any 32-bit I/O base address NIC occupies 32 bytes of I/O space
Transmit/Receive Buffer Memory
4 KB. 2 KB transmit, 2 KB receive
Labels
Microsoft PC97, Microsoft PC98, Microsoft PC99, Net PC, PCI 2.2
Manageability
DMI 2.0 and 2.0s
Power Management
ACPI 1.0
Pre-OS boot protocol support
PXE, BootP/DHCP, NCP, RPL