Filter
Top Products
RTC battery
Description Spare part number
RTC battery (includes cable and double-sided tape) 652650-001
Before removing the RTC battery, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 67), and then remove the following components:
a. Service cover (see
Service cover on page 69)
b. Smart Card reader (see
Smart Card reader on page 70)
c. Optical drive (see
Optical drive on page 71)
d. Hard drive (see
Hard drive on page 75)
e. Modem module (see
Modem module on page 84)
f. Keyboard (see
Keyboard on page 86)
g. Base enclosure (see
Base enclosure on page 91)
Remove the RTC battery:
1. Disconnect the RTC battery cable (1) from the TouchPad.
2. Detach the RTC battery (2) from the TouchPad. (The RTC battery is attached to the TouchPad
with double-sided tape.)
3. Remove the RTC battery.
104 Chapter 4 Removal and replacement procedures