HP (Hewlett-Packard) 89XXY Personal Computer User Manual


 
upgrading and servicing the pc
29
Filename: ma1rwtc.doc Title: HP-Print2k.dot
Template: HP-Print2K.dot Author: WASSER, Inc. Last Saved By: WASSER, Inc.
Revision #: 161 Page: 29 of 46 Printed: 04/26/01 09:20 AM
English
Users should ensure, for their own protection, that the
electrical ground connections of the power utility, telephone
lines, and internal metallic water pipe systems, if present,
are connected together. This precaution may be particularly
important in rural areas.
Warning:
Users should not attempt to
make such connections themselves, but
should contact the appropriate electrical
inspection authority or electrician, as
appropriate.
Avertissement :
Lutilisateur ne devrait pas
tenter de faire ces connexions lui-même
mais devrait utiliser les services
de lorganisme approprié dinspection des
installations électri
q
ues ou dun électricien,
selon le cas.
Warning:
The Load Number .9 assigned to
each terminal device denotes the
percentage of the total load to be
connected to a telephone loop; this is used
by the device to prevent overloading. The
termination on a loop may consist of any
combination of devices, sub
j
ect onl
y
to the
requirement that the sum of the Load
Numbers does not exceed 100.
Avertissement :
La valeur de charge .9
attribuée à chaque élément terminal
indique le pourcentage de la charge totale
pouvant être connecté à une boucle
télé
p
honi
q
ue. Cette valeur est utilisée
p
our
éviter les surchar
g
es. La terminaison dun
e
boucle peut être constituée dune
combinaison quelconque d’équipements,
dans la mesure où la somme des valeurs
de charge ne dépasse pas 100.
DOC Statement (Canada Only)
This Class B digital apparatus meets all requirements of the
Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la classe B respecte toutes les
exigences du Règlement sur le matériel brouilleur du
Canada.
Austel Statement (Australia Only)
When setting the number of automatic redials for the
modem, ensure the following: The number of automatic
redials that the modem performs should be limited to a
maximum of 9 redials plus the original call. If the above
retries are unsuccessful, no further attempts should be made
to the same number for a minimum period of five minutes.