Filter
Top Products
52 Chapter 3 Printing ENWW
Alternate Letterhead mode
Windows printer drivers include an Alternate Letterhead mode, which is configured on the Device Settings
tab in the MFP properties (in the Windows control panel). This mode causes all print jobs with media types
of Letterhead and Preprinted to be treated as two-sided (duplexed), so that you can load paper the same
way for one-sided and two-sided (duplex) printing. Because the print speed is the same as it is for two-sided
(duplex) printing, one-sided jobs print at approximately half-speed.
Labels, letter, A4-size
sheets, or
transparencies
Tray 1
only
No
(Never duplex)
Long edge toward feed direction; side to be
printed on facing up.
Envelopes Tray 1
only
No
(Never duplex)
Short edge toward feed direction; side to be
printed on facing up and the postage end
toward the MFP. If the height of the
envelope is greater than190 mm
(7.5 inches), feed the flap-edge first.
Otherwise, feed the flap-edge toward rear
of the MFP.
Type of media Tray Two-sided
(duplexed)
Media orientation
* When Alternate Letterhead mode is enabled and Letterhead or Preprinted is selected as
the media type, you must orient the media for two-sided (duplex) printing. For more
information, see Alternate Letterhead mode.