Filter
Top Products
HP UPS Management Module web interface 53
Click the UPS tabs to view detailed information for each of the sub units in the parallel system. The
parallel system can contain up to six sub units.
Click Help to view online help.
Manual Control menu
Click Manual Control in the left navigation frame to display the Manual Control screen. This screen
contains manual commands such as Initiate Battery Test and Restart Management Module.
NOTE: Depending on the specific UPS model, this screen will vary.
The Initiate Battery Test option is not available for all UPSs. To initiate a UPS battery test:
CAUTION: Selecting this option might result in an ungraceful shutdown.
IMPORTANT: Do not run a battery test while the UPS is On Battery.
1. Select Initiate Battery Test.
2. Click Execute Command. The results of the test appear on the Parameters screen ("Parameters menu"
on page 51) in the Test Results Summary field, and a log entry is created in the Application Log
("Application Log menu" on page 56).