Filter
Top Products
Installing
36 HP StorageWorks 2/8q Fibre Channel Switch Installation Guide
Configure the switch
Note: Advanced switch configuration and monitoring tasks are executed using the Switch
Manager application or the Command Line Interface, using a workstation connected to the switch.
See “Management System Requirements” on page 63 for information about connecting the
workstation, and the
HP StorageWorks 2/8q Fibre Channel Switch Management User Guide
for
details about the interfaces.
The switch is initially configured during the set up and installation of the MSA1000 Small
Business SAN, using the Small Business SAN Software CD.
If Switch Manager is not installed on your system, do the following:
Installing Switch Manager on Windows® systems
1. Close all programs currently running, and then insert the Small Business SAN Software
CD into the server or management workstation CD-ROM drive.
The CD automatically starts, and displays the HP Small Business SAN Wizard.
2. In the Welcome window, click Next, and then follow the onscreen instructions.
Note: Switch Manager is installed and placed in the following system folder:
C:\Program Files\HP\HP_StorageWorks_Switch_Manager.
Installing Switch Manager on Linux® systems
1. Close all programs currently running, and then insert the Small Business SAN Software
CD into the server or management workstation CD-ROM drive.
The CD auto-mounts, and executes an installation script.
If the CD does not auto-mount, mount the CD and execute the HP Small Business Linux
Wizard script from the
/linux directory. (install_smb.sh)
2. Follow the onscreen instructions to complete the installation.