Filter
Top Products
HP P2000 Dual I/O DC-power Carrier-Grade SFF Drive Enclosure
NOTE:
NEBS certified.
24-drive SFF bays, NEBS certified,
NOTE:
only sold with carrier-grade arrays
BV921B
HP MSA P2000 G3 Arrays support both the HP ProLiant Server SFF Hard Disk Drives and
HP MSA SFF Hard Disk Drives
HP ProLiant Server Hard Disk Drives
HP 146GB 6G SAS 15K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive
512547-B21
HP 300GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive
507127-B21
HP 450GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
581284-B21
HP 600GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
581286-B21
HP 900GB 6G SAS 10K rpm SFF (2.5-inch) Dual Port Enterprise 3yr Warranty Hard Drive
619291-B21
HP 300GB 6G SAS 15K rpm SFF (2.5-inch) Hot Plug Enterprise 3yr Warranty Hard Drive
627117-B21
HP MSA Hard Disk Drives
Drives, carrier-grade (all NEBS certified)
HP MSA 146GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D54A
HP MSA 300GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D55A
HP MSA 450GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
E2D56A
HP MSA 600GB 6G SAS 10K 2.5in Dual Port Enterprise 3yr Warranty Hard Disk Drive
E2D57A
HP MSA 900GB 6G SAS 10K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S59A
HP MSA 300GB 6G SAS 15K SFF(2.5-inch) Dual Port Ent 3yr Warranty Hard Drive
C8S61A
Carrier-grade HBA
HP FC2242SR 4Gb 2-port PCIe Fibre Channel Host Bus Adapter
A8003B
HP 82E 8Gb 2-port PCIe Fibre Channel Host Bus Adapter
NOTE:
Emulex 82E
AJ763B
For more information on HP Carrier Grade Platforms go to
http://www.hp.com/products1/servers/carrier_grade/
index.html?jumpid=reg_R1002_USEN
HP P2000 Remote Snap
Software
(G3 FC and FC/iSCSI, 1GbE
and 10GbE iSCSI
controllers only)
HP P2000 Remote Snap Software is array based software that provides remote replication on the
HP P2000 G3 MSA Array products (except SAS model). HP Remote Snap is a form of asynchronous
replication which consists of replication of block-level data from a volume on a local system to a
volume that may be on the same system or on a second independent system. This second system
may be collocated with the first system or may be located at a remote site. It requires T230Rxx
controller firmware or higher.
HP Remote Snap functionality is based on existing Snapshot technology offered by HP P2000 SAN
Array products. Snapshots are used to track the data to be replicated as well as to determine the
differences in data updated on the master volume, minimizing the amount of data to be transferred.
HP Remote Snap replication technology provides the ability to accomplish key data management
and protection capabilities. First, because Remote Snap uses snapshots as the underlying
technology it creates multiple local recovery points which can be used for such tasks as to
complement daily backups; second, replication provides the ability to access data in a remote site
which could be used for dispersed operations; and third but definitely not least important
replication allows for business continuance in the event of a failure on the primary site.
In order to perform a replication, a snapshot of the volume to be replicated is taken, creating a
point-in-time image of the data. This point-in-time image is then replicated to the destination
volume by copying the data represented by the snapshot via a transport medium such as TCP/IP
QuickSpecs
HP MSA P2000 G3 Modular Smart Array Systems
Hardware
DA - 13551 North America — Version 36 — December 9, 2013
Page 26