Filter
Top Products
2. Lift the front edge of the memory/WLAN module compartment cover (2), swing it back, and remove
the cover. The memory/WLAN module compartment cover is included in the Plastics Kit, spare
part number 486292-001.
3. Spread the retaining tabs (1) on each side of the memory module slot to release the expansion
memory module. (The edge of the module opposite the slot rises away from the computer.)
4. Remove the expansion memory module (2) by pulling the module away from the slot at an angle.
NOTE: Memory modules are designed with a notch (3) to prevent incorrect insertion into the
memory module slot.
Reverse this procedure to install the expansion memory module.
58 Chapter 4 Removal and replacement procedures