Filter
Top Products
Input power
The power information in this section may be helpful if the Slate will be used internationally.
The Slate operates on DC power, which can be supplied by an AC or a DC power source.
The AC power source must be rated at 100–240 V, 50–60 Hz.
Although the Slate can be powered from a standalone DC power source, it should be powered only
with an AC adapter or a DC power source supplied and approved by HP for use with this Slate.
The Slate is capable of accepting DC power within the following specifications.
Input power Rating
Operating voltage and current 19 V dc @ 1.58 A - 30 W
NOTE: This product is designed for IT power systems in Norway with phase-to-phase voltage not
exceeding 240 V rms.
NOTE: The Slate operating voltage and current can be found on the system regulatory label, located
inside the label tray on the right edge of the Slate.
34 Chapter 6 Specifications