Filter
Top Products
Speakers
Description Spare part number
Speaker Kit (includes left and right speakers and cable) 682759-001
Before removing the speakers, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 33).
5. Remove the service door (see
Service door on page 34).
6. Remove the optical drive (see
Optical drive on page 35).
7.
Remove the hard drive (see
Hard drive on page 38).
8. Remove the keyboard (see
Keyboard on page 45).
9. Remove the top cover (see
Top cover on page 48).
Remove the speakers:
1. Release the speaker clips holding the left speaker into the top cover (1).
2.
Rotate and lift the left speaker (2), and then remove the speaker cable from the routing clips built
into the top cover.
3. Remove the Phillips M2.5 x 3 screw (3) from the right speaker.
NOTE: This screw also secures the power button board to the top cover.
ENWW
Component replacement procedures
51