Filter
Top Products
c.
Remove the wireless antenna cables and transceivers.
Reverse this procedure to reassemble and install the display assembly.
Optical drive cable
Description Spare part number
Optical drive cable (includes optical drive connector) 682742-001
Before removing the optical drive cable, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 33).
5. Remove the service door (see
Service door on page 34).
6. Remove the optical drive (see
Optical drive on page 35).
7. Remove the hard drive (see
Hard drive on page 38).
8. Remove the keyboard (see
Keyboard on page 45).
9. Remove the top cover (see
Top cover on page 48).
Remove the optical drive cable:
1. Disconnect the optical drive cable (1) from the system board.
2. Release the optical drive cable (2) from the clips built into the base enclosure.
64 Chapter 4 Removal and replacement procedures ENWW