Filter
Top Products
10.
If it is necessary to replace the display panel cable:
a. Release the adhesive and tabs (1) on the display enclosure shielding that secure the display
panel cable to the display enclosure.
b. Release the display panel cable from the clips and remove the display panel cable (2). The
display panel cable includes the webcam/microphone module cable and is available in
the Display Panel Cable Kit.
11. If it is necessary to replace the wireless antenna cables and transceivers:
a. Release the wireless antenna cables from the clips (1) built into the display enclosure.
b. Release the wireless antenna transceivers (2) from the display enclosure. (The wireless
antenna transceivers are attached to the display enclosure with double-sided tape.)
ENWW
Component replacement procedures
63