Filter
Top Products
Fax Setup
Menu Item Sub-menu item Sub-menu item Description
Basic Setup Time/Date (Settings for time
format, current
time, date format,
and current date.)
Sets the time and date setting for the product.
Fax Header Your Fax Number
Company Name
Sets the identifying information that is sent to the receiving
product.
Answer Mode Automatic
Manual
TAM
Fax/Tel
Sets the type of answer mode. The following options are
available:
●
Automatic: The product automatically answers an
incoming call on the configured number of rings.
●
TAM: A telephone answering machine (TAM) is
attached to the Aux phone port of the product. The
product will not pick up any incoming call, but only listen
for fax tones after the answering machine has picked
up the call.
●
Fax/Tel: The product must automatically pick up the
call and determine if the call is a voice or fax call. If the
call is a fax call, the product handles the call as usual.
If the call is a voice call, an audible synthesized ring is
generated to alert the user of an incoming voice call.
●
Manual : The user must press the Start Fax
button
or use an extension phone to make the product answer
the incoming call.
Rings to Answer (Range of 1-9) Sets the number of rings that must occur before the fax
modem answers.
Basic Setup Distinctive Ring All Rings
Single
Double
Triple
Double&Triple
Allows a user with distinctive-ring phone service to set which
rings are answered by the fax device.
●
All Rings: The product answers any calls that come
through the telephone line.
●
Single: The product answers any calls that produce a
single-ring pattern.
●
Double: The product answers any calls that produce a
double-ring pattern.
●
Triple: The product answers any calls that produce a
triple-ring pattern.
●
Double&Triple: The product answers any calls that
produce a double-ring or triple-ring pattern.
Dial Prefix On
Off
The On setting specifies that a prefix number will be dialed
automatically when sending faxes from the product.
12 Chapter 2 Control panel menus ENWW