Filter
Top Products
c. Open the Fax Service menu.
d. Select the Clear Saved Faxs item.
●
Divide the large fax job into smaller sections, and then fax them individually.
Scanner error
●
Verify that the paper meets product size requirements. The product does not support pages longer
than 381 mm (15 in) for faxing.
●
Copy or print the original onto letter, A4, or legal size paper and then resend the fax.
The control panel displays a Ready message with no attempt to send the fax
●
Check the fax activity log for errors.
a. Open the Fax menu.
b. Open the Fax Reports menu.
c. Open the Fax Activity Log menu.
d. Select the Print Log Now option.
●
If a phone is connected to the product, make sure that the phone is hung up.
●
Disconnect all other lines between the fax and the product.
●
Connect the product directly into the wall telephone jack and resend the fax.
The control panel displays the message "Storing page 1" and does not progress beyond
that message
●
Delete stored faxes from memory.
a. Open the Setup menu.
b. Open the Service menu.
c. Open the Fax Service menu.
d. Select the Clear Saved Faxs item.
Faxes can be received, but not sent
Send fax and nothing happens.
1. Check for a dial tone on the phone line by using the Start Fax
button.
2. Turn the product off then on.
3. Use the control panel to configure the fax time, date, and fax header information.
a. Open the Setup menu.
b. Open the Fax Setup menu.
c. Open the Basic Setup menu.
ENWW Solve fax problems 159