Filter
Top Products
Menu item Sub-menu item Sub-menu item Description
Dial Prefix On
Off*
Specifies a prefix number that must be dialed when sending
faxes from the product. If you turn this feature on, the product
prompts you to enter the number and then it automatically
includes that number every time you send a fax.
Advanced Setup Fax Resolution Standard
Fine*
Superfine
Photo
Sets the resolution for sent documents. Higher resolution
images have more dots per inch (dpi), so they show more
detail. Lower resolution images have fewer dots per inch and
show less detail, but the file size is smaller and the fax takes
less time to transmit.
Lighter/Darker Sets the darkness of outgoing faxes.
Fit to Page On*
Off
Shrinks incoming faxes that are larger than the paper size
set for the tray.
Glass Size Letter
A4
Sets the default paper size for documents being scanned
from the flatbed scanner.
Dialing Mode Tone*
Pulse
Sets whether the product should use tone or pulse dialing.
Redial if Busy On*
Off
Sets whether the product should attempt to redial if the line
is busy.
Redial if No Answer On
Off*
Sets whether the product should attempt to redial if the
recipient fax number does not answer.
Redial if Comm.
Error
On*
Off
Sets whether the product should attempt to redial the
recipient fax number if a communication error occurs.
Detect Dial Tone On
Off*
Sets whether the product should check for a dial tone before
sending a fax.
Billing Codes On
Off*
Enables the use of billing codes when set to On. A prompt
appears where you can enter the billing code for an outgoing
fax.
Extension Phone On*
Off
When this feature is enabled, you can press the 1-2-3
buttons on the extension phone to cause the product to
answer an incoming fax call.
Stamp Faxes On
Off*
Sets the product to print the date, time, sender's phone
number, and page number on each page of incoming faxes.
18 Chapter 2 Control panel menus ENWW