Filter
Top Products
Tab or section Description
Status tab
Provides product, status, and
configuration information.
● Device Status: Shows the product status and shows the life remaining of
HP supplies, with 0% indicating that a supply is empty.
●
Supplies Status: Shows the approximate percent life remaining of HP supplies.
When the estimated life remaining is less than 10% but has not reached the
estimated end of life, Less Than 10% displays. When a supply reaches its
estimated end of life –% displays. Actual supply life remaining can vary. Consider
having a replacement supply available to install when print quality is no longer
acceptable. The supply does not need to be replaced unless the print quality is no
longer acceptable. When an HP supply has reached “Very Low”, HP’s Premium
Protection Warranty on that supply ends.
The imaging drum's estimated remaining life and installation date displays when
less than approximately 30% of its estimated life remains.
● Device Configuration: Shows the information found on the product Configuration
page.
●
Network Summary: Shows the information found on the product Network
Configuration page.
● Reports: Allows you to print the configuration and supplies status pages that the
product generates.
● Event Log: Shows a list of all product events and errors.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected.
System tab
Provides the ability to configure
the product from your computer.
● Paper Setup: Allows you to change the paper-handling defaults for the product.
●
Print Quality: Allows you to change the print quality defaults for the product,
including calibration settings.
●
Print Density: Allows you to change the contrasts, highlights, midtones, and
shadows values for each supply.
●
Paper Types: Allows you to configure print modes that correspond to the media
types that the product accepts.
●
System Setup: Allows you to change the system defaults for the product.
●
Service: Allows you to start the cleaning procedure on the product.
● Product Security: Allows you to set or change the Administrator password.
●
Support button: Provides a link to the product support page. The Support button
can be password-protected.
●
Shop for Supplies button: Provides a link to a page where you can order supplies
for the product. The Shop for Supplies button can be password-protected.
NOT
E
: The System tab can be password-protected. If this product is on a network,
always consult with the printer administrator before changing settings on this tab.
Networking tab
Provides the ability to change
network settings from your
computer.
Network administrators can use this tab to control network-related settings for the
product when it is connected to an IP-based network. This tab does not appear if the
product is directly connected to a computer.
76 Chapter 8 Manage and maintain the product ENWW