Filter
Top Products
Service menu
Use this menu to restore default settings, clean the product, and activate special modes that affect print
output. Items that have asterisks (*) indicate the factory default setting.
Menu item Sub-menu item Description
Cleaning Page Use this option to clean the product if you see
toner specks or other marks on the printed
output. The cleaning process removes dust and
excess toner from the paper path.
When you select this item, the product prompts
you to load plain paper in Tray 1 and then press
OK to start the cleaning process. Wait until the
process is complete. Discard the page that
prints.
USB Speed High*
Full
Sets the USB speed to High or Full. For the
product to actually operate at high speed, it must
have high speed enabled and be connected to
an EHCI host controller that is also operating at
high speed. This menu item also does not reflect
the current operating speed of the product.
Less paper curl On
Off*
If printed pages are consistently curled, use this
option to set the product to a mode that reduces
curl.
Archive print On
Off*
If you are printing pages that will be stored for a
long time, use this option to set the product to a
mode that reduces toner smearing and dusting.
Firmware Date Displays the current firmware datecode.
Restore defaults Sets all customized copy settings to the factory
default values.
ENWW Service menu 15