Filter
Top Products
HP UPD PCL 5 driver description
●
Available for download from the Web at
www.hp.com/support/ljcp1520series
●
Compatible with previous PCL versions and older HP LaserJet products
●
The best choice for printing from third-party or custom software programs
●
Designed for use in corporate Windows environments to provide a single driver for use with multiple
printer models
●
Preferred when printing to multiple printer models from a mobile Windows computer
Change print job settings
Tool for changing the settings Method for changing the
settings
Duration of changes Hierarchy of changes
Software program settings On the File menu in the software
program, click Page Setup or a
similar command.
These settings are in effect for
the current print job only.
Settings changed here override
settings changed anywhere else.
Printer Properties in the software
program
The steps vary for each software
program. This procedure is most
common.
1. On the File menu in the
software program, click
Print.
2. Select the product, and then
click Properties or
Preferences.
3. Change the settings on any
of the tabs.
These settings are in effect for
the current session of the
software program.
Settings changed here override
default printer driver settings and
default product settings.
Default printer driver settings 1. Open the list of printers on
your computer, and select
this product.
NOTE: This step varies
for each operating system.
2. Click Printer, and then click
Printing Preferences.
3. Change the settings on any
of the tabs.
These settings remain in effect
until you change them again.
NOTE: This method changes
the default settings for the printer
driver for all software programs.
You can override these settings
by changing settings in the
software program.
Default product settings Change product settings on the
control panel, or in the product
management software that came
with your product.
These settings remain in effect
until you change them again.
You can override these settings
by making changes with any
other tool.
ENWW Change print job settings 19