Filter
Top Products
7.
Remove the four Phillips PM2.5×7.0 screws that secure the top cover to the computer.
8.
Lift the rear edge of the top cover (1) until the left and right sides disengage from the
base enclosure.
9. Remove the top cover (2).
Reverse this procedure to install the top cover.
Speakers
Description Spare part number
Speaker Kit (includes left and right speakers and cable) 659508-001
Before removing the speakers, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
Component replacement procedures
55