Filter
Top Products
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 32), and then remove the following components:
a. Service cover (see
WLAN module on page 37)
b. Keyboard (see
Keyboard on page 46)
c. Top cover (see
Top cover on page 53)
Remove the speakers:
1. Turn the top cover upside down, with the front edge toward you.
2. Release the speaker cables from the clips built into the TouchPad (1) and top cover (2).
3. Release the speakers from the clips (3) built into the top cover.
4. Remove the speakers and cables (4).
Reverse this procedure to install the speakers.
56 Chapter 4 Removal and replacement procedures