Filter
Top Products
Power Switch/LED Assembly
Description Spare part number
Power switch/LED assembly 667850-001
1. Prepare the computer for disassembly (Preparation for Disassembly on page 43).
2. Remove the access panel (
Access Panel on page 44).
3. Remove the front bezel (
Front Bezel on page 45).
4. Remove the optical drive (
Removing an Optical Drive on page 63).
5. Disconnect the braided cables from the black system board connector labeled F_PANEL (1).
6. Remove the cable from the metal clip (2) built into the computer.
7. From the inside of the computer, push up on the tab on the bottom of the assembly (3) to
disengage it from the computer.
Figure 7-21 Removing the power switch cable, disengaging the assembly
Power Switch/LED Assembly 67