Filter
Top Products
Load the photo tray
The photo tray supports the following media:
● 10 x 15 cm (4 x 6 inch) photo paper (with or without tab)
● 13 x 18 cm (5 x 7 inch) photo paper
● Index cards
● Hagaki cards
Follow the steps to load the photo tray:
1. Press the output tray latch from below and lift upwards to separate the output tray
from the photo tray.
2. Raise the output tray.
3. Remove any paper that is loaded in the photo tray.
4. Slide the paper-width guide to the left until it stops.
5. Load up to 20 sheets of photo paper into the photo tray with the side to be printed
facing down. Slide the paper in until it stops.
Note Align the paper to the right edge of the tray.
6. Slide the paper-width guide to fit close to the edges of the paper without bending
the paper.
HP Photosmart D5100 series User Guide 11