Table 3-4 Computer Setup—Security (continued)
Device Security Allows you to set Device Available/Device Hidden (default is Device Available) for:
● Embedded security device (some models)
● System audio
● Network controller
NOTE: You must disable AMT before trying to hide the network controller.
●
Serial ports (some models)
●
Parallel port (some models)
●
SATA0
● SATA1
●
SATA2 (some models)
●
SATA3 (some models)
● SATA4 (some models)
USB Security Allows you to set Enabled/Disabled (default is Enabled) for:
● Front USB Ports
◦
USB Port 1
◦
USB Port 2
◦ USB Port 3
◦
USB Port 4
●
Rear USB Ports
◦ USB Port 1
◦
USB Port 2
◦
USB Port 3
◦
USB Port 4
◦
USB Port 5
◦
USB Port 6
● Accessory USB Ports
◦ USB Port 1
◦
USB Port 2
◦
USB Port 3 (some models)
◦
USB Port 4 (some models)
Slot Security Allows you to disable any PCI or PCI Express slot. Default is enabled.
Network Boot Enables/disables the computer’s ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.) Default is enabled.
Computer Setup (F10) Utilities 23