Filter
Top Products
6-5
ENWW
Uninstalling the Printer Software
For parallel port or network connections:
1
Start Windows and make sure no other Windows applications are
running.
2
Click
Start
,
Programs
,
HP Deskjet 1180c Printer
, and select
Uninstaller
.
3
Follow the instructions that appear on the screen, to complete the
removal of the printer software.
For USB connections, follow the steps above, and restart Windows. If
the software was not successfully installed, or the Uninstaller could not
be found:
USB Installation Failed or Nothing Prints
Through USB
z
If the installation failed, uninstall the driver and retry the installation.
z
Check that your computer has a USB port and is properly
configured to use USB.
z
Check that your computer is running.
z
Check that the USB cable is properly connected to the computer
and the printer.
z
Check that the printer is on.
z
Verify that the system detects the printer: In the System control
panel check that you can see
USB Hewlett-Packard Deskjets
device name and the
Deskjet 1180c
printer name below.
You must have administrator privileges to uninstall the printer software
in the Windows NT 4.0, Windows 2000, and Windows XP.
If the printer was not detected when it is plugged in, run the scrubber
utility from the Starter CD. For Windows 98 and Windows Me, use the
scrub9x.exe located In the WINDOWS\UTILS\SCRUBBER\WIN98_ME
folder.
For Windows 2000 and Windows XP, use the scrub2k.exe located in
the WINDOWS\UTILS\SCRUBBER\WIN2K directory instead. Go
through the whole installation process again after this is done.