Filter
Top Products
Contents 45
Figure 24 Removing the backplane
To install the backplane:
1. Orient the backplane so that the three notches on the board align with the three hooks on the
drive cage and press the board down until it clicks into place.
2. Secure the backplane with screws.
Figure 25 Installing the backplane
3. Install all cables including optical drive cables.
The Rear DVD/CDRW Optical Drive PCI cage
To remove the Rear DVD/CDRW Optical Drive PCI cage
：
1. Remove the screw that secures the optical drive carrier to the rear DVD/CDRW optical drive PCI
cage using a T-10 driver. (step 1 in figure 26)
2. Pull the optical drive carrier out of the cage. (step 2 in figure 26)