Filter
Top Products
POST problems flowchart
Symptoms:
• Server does not complete POST
NOTE: The server has completed POST when the system attempts to access the boot device.
• Server completes POST with error
Possible problems:
• Improperly seated or faulty internal component
• Faulty KVM device
• Faulty video device
Refer toItem
“POST error messages and beep codes” (page 86)1
"Video problems" in the HP ProLiant Servers Troubleshooting Guide located on the Documentation CD
or on the HP website (http://www.hp.com/support)
2
KVM or iLO 2 documentation3
“Loose connections” (page 74)4
“Symptom information” (page 73)5
Troubleshooting flowcharts 81