HP (Hewlett-Packard) DV4200 Laptop User Manual


 
2–6 Maintenance and Service Guide
Troubleshooting
Selecting from the Advanced Menu
Table 2-4
Advanced Menu
Select To Do This
Language (or press f2) Change the Computer Setup language.
Boot options
Enable/Disable MultiBoot, which sets a startup
sequence that can include most bootable
devices and media in the system.
Set the boot order.
Device options Swap the functions of the fn key and
left ctrl key.
Enable/Disable multiple pointing devices at
startup. (To set the computer to support only a
single, usually nonstandard, pointing device at
startup, select Disable.)
Enable/Disable USB legacy support for a USB
keyboard, mouse, and hub. When USB legacy
support is enabled
A USB keyboard, mouse, and hub work
even when a Windows operating system
is not loaded.
The computer starts from a bootable hard
drive, diskette drive diskette, or CD,
CD-RW, or DVD inserted into a drive
connected by a USB connector to the
computer or to an optional docking
device.
Select a parallel port mode: EPP (Enhanced
Parallel Port), standard, bidirectional, or ECP
(Enhanced Capabilities Port).
Enable/Disable all settings in the SpeedStep
window. (When Disable is selected, the
computer runs in Battery Optimized mode.)