HP (Hewlett-Packard) DV7 Laptop User Manual


 
Display assembly
NOTE: The display assembly includes a webcam, 2 microphones, and 2 wireless antenna transceivers
and cables.
Description Spare part number
17.3-inch HD+ flush glass AntiGlare display assembly for use in white computers 516296-001
17.3-inch HD+ BrightView display assembly for use in white computers 516295-001
17.3-inch HD+ flush glass AntiGlare display assembly for use in black computers 519260-001
17.3-inch HD+ BrightView display assembly for use in black computers 519259-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 43).
5. Disconnect the wireless antenna cables from the WLAN module (see
WLAN module on page 50).
6. Remove the switch cover and keyboard (see
Switch cover and keyboard on page 57).
7. Remove the speaker assembly (see
Speaker assembly on page 62).
Remove the display assembly:
1. Disconnect the display panel cable (1) and the webcam/microphone cable (2) from the system
board.
64 Chapter 4 Removal and replacement procedures