Filter
Top Products
TV tuner module cable
NOTE: The TV tuner module cable is available in the Cable Kit, spare part number 516328-001.
Before removing the TV tuner module cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
Battery on page 43).
5. Remove the following components:
a. Hard drive (see
Hard drive on page 48).
b. Optical drive (see
Optical drive on page 44).
c. Switch cover and keyboard (see
Switch cover and keyboard on page 57).
d. Speaker assembly (see
Speaker assembly on page 62).
e. Display assembly (see
Display assembly on page 64).
f. Top cover (see
Top cover on page 74).
g. USB board (see
USB board on page 83).
h. System board (see
System board on page 79).
Remove the TV tuner module cable:
1. Remove the TV tuner module cable from the clips (1) built into the base enclosure.
2. Remove the TV tuner module connector (2) from the clip built into the side of the base enclosure.
86 Chapter 4 Removal and replacement procedures