Filter
Top Products
Description Spare part number
DVD±RW Double-Layer LightScribe SuperMulti Drive 641301-001
Optical Drive Hardware Kit (includes bracket, optical drive cable, bezels (2), and screws 641549-001
Before removing the optical drive, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 52).
Remove the optical drive:
1. Slide the release latch (1) to release the service cover from the computer.
2. Lift the rear edge of the service cover (2) up and forward until it rests at an angle.
3. Remove the service cover. The service cover is available in the Plastics Kit, spare part number
641305-001.
54 Chapter 4 Removal and replacement procedures