Filter
Top Products
c.
Keyboard (see
Keyboard on page 59)
d. Top cover (see
Top cover on page 63)
Remove the TouchPad button board:
1. Turn the top cover upside down, with the front toward you.
2. Release the TouchPad button board ZIF connector (1) to which the TouchPad button board cable
is connected, and then disconnect the cable (2) from the TouchPad button board.
3.
Release the TouchPad board ZIF connector (3) to which the TouchPad button board cable is
connected, and then disconnect the cable (4) from the TouchPad board.
4. Release the two pieces of grounding tape (5) that attach the TouchPad button board to
the TouchPad.
5. Remove the TouchPad button board cable (6).
6. Remove the two Phillips PM2.5×4.0 screws (1) that secure the TouchPad button board bracket to
the top cover.
7. Lift the rear edge of the TouchPad button board bracket (2) until it rests at an angle.
Component replacement procedures
71