Filter
Top Products
5. Remove the system board (4) by sliding it away from the base enclosure at an angle.
Reverse this procedure to install the system board.
Audio/infrared board
Description Spare part number
Audio/infrared board
NOTE: The audio/infrared board spare part kit does not include an audio/infrared board cable.
The audio/infrared board cable is included in the Cable Kit, spare part number 480474-001.
480477-001
Before removing the audio/infrared board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC Adapter from the computer.
4. Remove the battery (see
Battery on page 54).
5. Remove the following components:
a. Hard drive (see
Hard drive on page 59)
b. Optical drive (see
Optical drive on page 57)
c. Switch cover (see
Switch cover on page 69)
d. Keyboard (see
Keyboard on page 71)
e. Speaker assembly (see
Speaker assembly on page 75)
f. Display assembly (see
Display assembly on page 76)
g. Top cover (see
Top cover on page 85)
Component replacement procedures 97