Filter
Top Products
4. Remove the battery (see Battery on page 54).
5. Remove the following components:
a. Hard drive (see
Hard drive on page 59)
b. Optical drive (see
Optical drive on page 57)
c. Switch cover (see
Switch cover on page 69)
d. Keyboard (see
Keyboard on page 71)
e. Speaker assembly (see
Speaker assembly on page 75)
f. Display assembly (see
Display assembly on page 76)
g. Top cover (see
Top cover on page 85)
h. System board (see
System board on page 94)
Remove the subwoofer:
1. Remove the two Phillips PM2.5×4.0 broad-head screws (1) that secure the subwoofer to the
base enclosure.
NOTE: When removing the subwoofer screws, make note of the location and orientation of the
rubber grommets (2). Failure to properly install these grommets can lead to decreased subwoofer
performance.
2. Remove the subwoofer (3) from the base enclosure.
Reverse this procedure to install the subwoofer.
Component replacement procedures 101