Filter
Top Products
Bluetooth module
Description Spare part number
Bluetooth module (includes Bluetooth module cable) 412766-002
Before removing the Bluetooth module, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 47).
5. Remove the following components:
a. Hard drive (see
Hard drive on page 52)
b. Optical drive (see
Optical drive on page 59)
c. Switch cover (see
Switch cover on page 61)
d. Keyboard (see
Keyboard on page 63)
e. Speaker assembly (see
Speaker assembly on page 66)
f. Display assembly (see
Display assembly on page 69)
g. Top cover (see
Top cover on page 75)
Remove the Bluetooth module:
1. Disconnect the Bluetooth module cable (1) from the system board. The Bluetooth module cable is
included with the Bluetooth module spare part kit and is also included in the Cable Kit, spare part
number 448015-001.
2. Route the Bluetooth module cable (2) under the system board.
3. Remove the two silver Phillips PM2.0×3.0 screws (3) that secure the Bluetooth module to the base
enclosure.
82 Chapter 4 Removal and replacement procedures