Filter
Top Products
●
Power connector cable (see
Power connector cable on page 73)
●
Fan/heat sink assembly (see
Fan/heat sink assembly on page 74)
●
Processor (see
Processor on page 77)
Remove the system board:
1. Disconnect the following cables from the system board:
(1) Display panel cable and display function cable
(2) Power button board cable
(3) Audio/USB board ZIF cable and audio/USB board cable
(4) TouchPad LED board cable
(5) Card Reader board cable
2. Release the power connector (1) from the clip built into the base enclosure.
ENWW
Component replacement procedures
71