Filter
Top Products
Top cover
NOTE: The top cover spare part kit includes a TouchPad.
Description Spare part number
In flying red finish 719868-001
In pearl white finish 719867-001
In regal purple finish 719870-001
In revolutionary blue finish 719869-001
In sparkling black and silver finish 719871-001
Before removing the top cover, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 46), and then remove the following components:
a. Optical drive (see
Optical drive on page 47)
b. Hard drive (see
Hard drive on page 49)
c. Keyboard (see
Keyboard on page 56)
NOTE: When replacing the top cover, be sure to remove the following components from the defective
top cover and install them on the replacement top cover:
●
Power button board (see
Power button board on page 64)
●
TouchPad button board (see
TouchPad button board on page 65)
Remove the top cover:
1. Close the computer.
2. Turn the computer upside down with the front toward you.
60 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts