Filter
Top Products
Display assembly subcomponents
NOTE: The display assembly is spared only at the subcomponent level. For more display assembly
spare part information, see the individual removal subsections.
To remove the display assembly and access the display assembly subcomponents, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
Battery on page 46), and then remove the following components:
a. Optical drive (see
Optical drive on page 47)
b. Hard drive (see
Hard drive on page 49)
c. WLAN module (see
WLAN module on page 51)
d. Keyboard (see
Keyboard on page 56)
e. Top cover (see
Top cover on page 60)
Remove the display assembly:
1. Disconnect the display panel cable (1) from the system board.
2. Release the display panel cable from the clips built into the base enclosure (2).
3. Release the wireless antenna cables from the clips built into the base enclosure (3).
66 Chapter 6 Removal and replacement procedures for Authorized Service Provider parts