Filter
Top Products
TouchPad button board
Description Spare part number
TouchPad button board (includes bracket and cables) 685099-001
Before removing the TouchPad button board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 34), and then remove the following components:
●
Memory module/wireless module compartment cover (see
WLAN module on page 42)
●
Hard drive (see
Hard drive on page 47)
●
Keyboard (see
Keyboard on page 53)
●
Top cover (see
Top cover on page 57)
To remove the TouchPad button board:
1. Turn the top cover upside down with the front toward you.
2. Remove the two Phillips PM2.0×3.0 screws (1) that secure the TouchPad button board and
bracket to the top cover.
3. Remove the bracket (2).
4. Release the ZIF connector to the TouchPad board cable (3), and then disconnect the cable from
the TouchPad board. (The TouchPad board is attached to the top cover and cannot be
removed.)
Component replacement procedures 63