HP (Hewlett-Packard) E0P69UAABA Laptop User Manual


 
Display assembly
This section describes removing the display assembly in its entirety and disassembling all the display
subcomponents.
If you only need to remove the display bezel, webcam/microphone module, or display panel, you do
not need to remove the entire display assembly from the computer. See
Display subcomponents
(bezel, webcam, panel) on page 35 for more information about removing the display subcomponents
that do not require that you remove the entire display assembly from the computer.
Description Spare part number
35.6-cm (14.0-in), HD, LED, BrightView display panel 685101-001
35.6-cm (14.0-in), HD, LED, Anti-glare display panel 694746-001
Antennas (includes wireless antenna cables and transceivers; also includes Mylar screw covers)
NOTE: Models may have either one or two antennas installed.
685076-001
Display bezel (includes Mylar screw covers) 685081-001
Display cable (includes display panel cable and webcam/microphone cable; also includes Mylar
screw covers)
685083-001
Display enclosure for use in charcoal (includes Mylar screw covers) 685756-001
Display enclosure for use in black models (includes Mylar screw covers) 713529-001
Hinge covers (includes Mylar screw covers) 685088-001
Hinges (includes Mylar screw covers) 685090-001
HP TrueVision HD webcam/microphone module 694747-001
HP VGA webcam/microphone module 685112-001
Rubber display bumpers 685102-001
Before removing the display assembly in its entirety, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 34).
5. Disconnect the WLAN module antenna cables from the WLAN module (see
WLAN module
on page 42).
6. Remove the following components:
Hard drive (see
Hard drive on page 47)
Keyboard (see
Keyboard on page 53)
Top cover (see
Top cover on page 57)
Component replacement procedures 71