Filter
Top Products
Description Spare part number
System board for use only with computer models equipped with an Intel Pentium or Celeron
processor and a graphics subsystem with UMA video memory
●
For use in models without Windows 8 685768-001
●
For use in models with Windows 8 Standard 685768-501
● For use in models with Windows 8 Professional 685768-601
System board for use only with computer models equipped with an Intel Pentium or Celeron
processor and a graphics subsystem with UMA video memory (RCTO system board for use in
Brazil and India only)
● For use in models without Windows 8 685783-001
●
For use in models with Windows 8 Standard 685783-501
●
For use in models with Windows 8 Professional 685783-601
Thermal pad (for use with all models) 651046-001
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 34).
5. Remove the following components:
●
WLAN module (see
WLAN module on page 42)
●
Hard drive (see
Hard drive on page 47)
●
Keyboard (see
Keyboard on page 53)
●
Top cover (see
Top cover on page 57)
●
Speakers (see
Speakers on page 65)
●
USB board (see
USB board on page 67)
●
Power connector cable (see
Power connector cable on page 69)
6. Disconnect the display cable from the system board (see
Display assembly on page 71).
NOTE: When replacing the system board, be sure that the following components are removed from
the defective system board and installed on the replacement system board:
●
Memory module (see
Memory module on page 45)
●
RTC battery (see
RTC battery on page 50)
82 Chapter 4 Removal and replacement procedures